Hand Instruments
The Edge Equine Dental Floats > S-Series |
- The Edge Equine* Dental Hand Floats are crafted from premium quality stainless steel
- Low profile boxing with either one or two screws to secure the blade to the head of the float handle
- Rapid changeover of blades.
- Plastic grips are ergonomically shaped for user's comfort
- Sturdy and dependable using tubular or solid stainless steel shafts
S Series Low Profile Float - Premolars (SRS7050) | |
 
| Solid stainless steel shaft 9.5mm D, 260mm L, 50mm head angled at 2 degrees and offset for treating #1,#2 & #3 upper cheek teeth and #1 lower cheek teeth |
S Series Low Profile Float - Premolars (PMS2050) | |
 
| Solid stainless steel shaft 9.5mm D, 240mm L, 50mm head angled at 24 degrees for treating the #1, #2 and #3 upper cheek teeth and #1 lower cheek teeth. |
S series Low Profile Float (FMS5050) | |
 
| Solid stainless steel shaft 9.5mm D, 390mm L, 50mm head angled at minus 2 degrees for treating the upper #3 to #6 and lower #1 to #6 cheek teeth. |
S Series Low Profile Float (LMS3540) | |
 
| Solid stainless steel shaft 9.5mm D, 390mm L, 40mm head angled at minus 4 degrees for treating the #6 upper cheek teeth. |
S Series Low Profile Float (LMS3540TRIG) | |
| Same as the LMS3540 but with an added finger trigger to reduce grip fatigue. |
S Series Low Profile Float - Premolars (SRS6040) | |
 
| Solid stainless steel shaft 9.5mm D, 220mm L, 40mm head angled at 4 degrees for treating lower cheek tooth. |
The Edge Equine Dental Blades > S-Series |
Benefits of disposable blades
- Avoids the two way mailing of regrinds, and associated costs and delays
- Minimizes the number of blades in your business system (no more doubling up of blades on hand and those away at regrinders)
- Avoids inconsistencies in the quality of regrinds
- Removes the weighty burden of excess carbide required for future regrinds
Choose blades which are lightweight, consistent, durable and disposable!
Coarse 2" S-Series Blade (SCS2) | |
 
| Coarse blade with alternating rows of narrower and wider teeth for use in S series floats with a 50mm head - blade edged in red. |
Fine 2" S-Series Blade (SPB2) | |
| Fine to medium blade with a uniform cut to glide easily - for use in S series floats with a 50mm head, blade edged in yellow. |
Fine 1.5" S-Series Blade (SPB1.5) | |
| Fine to medium blade with a uniform cut to glide easily - for use in S series floats with a 40mm head, blade edged in yellow. |
Medium 1.5" S-Series Blade (SMU1.5) | |
| Medium blade - just a litle more aggressive than the fine blade - for use in S series floats with a 40mm head, blade edged in green. |
Coarse 1.5" S-Series Blade (SCS1.5) | |
| Coarse blade with alternating rows of narrower and wider teeth for use in S series floats with a 40mm head - blade edge in red. |
Medium 2" S-Series Blade (SMU2) | |
| Medium blade - just a litle more aggressive than the fine blade - for use in S series floats with a 50mm head, blade edged in green. |
The Edge Equine Dental Blades > E-Series |
Benefits of disposable blades
- Avoids the two way mailing of regrinds, and associated costs and delays
- Minimizes the number of blades in your business system (no more doubling up of blades on hand and those away at regrinders)
- Avoids inconsistencies in the quality of regrinds
- Removes the weighty burden of excess carbide required for future regrinds
Choose blades which are lightweight, consistent, durable and disposable!
Medium Blade, 2 inch (103750) | |
| Medium blade - just a little more aggressive than the fine blade - for use in older E series floats with a 50mm head, blade edged in green. |
Coarse Blade 1.5 inch (103840) | |
 
| Coarse blade with alternating rows of narrower and wider teeth for use in older E series floats with a 40mm head, blade edged in red. |
Fine Blade, 1.5 inch (103640) | |
| Fine to medium blade with a uniform cut to glide easily - for use in older E series floats with a 40mm head, blade edged in yellow. |
Fine Blade, 2 inch (103650) | |
| Fine to medium blade with a uniform cut to glide easily - for use in ilder E series floats with a 50mm head, blade edged in yellow. |
Coarse Blade 2 inch (103850) | |
 
| Coarse blade with alternating rows of narrower and wider teeth for use in older E series floats with a 50mm head, blade edged in red. |
Fast Blade, 1.5 inch (103940) | |
| Most aggressive blade with alternating rows of narrower and wider teeth for use in older E series floats with a 40mm head, blade edged in blue. |
Fast Blade, 2 inch (103950) | |
| Most aggressive blade with alternating rows of narrower and wider teeth for use in older E series floats with a 50mm head, blade edged in blue. |
Medium Blade, 1.5 inch (103740) | |
| Medium blade - just a little more aggressive than the fine blade - for use in older E series floats with a 40mm head, blade edged in green. |
The Edge Equine Dental Blades > Other |
Benefits of disposable blades
- Avoids the two way mailing of regrinds, and associated costs and delays
- Minimizes the number of blades in your business system (no more doubling up of blades on hand and those away at regrinders)
- Avoids inconsistencies in the quality of regrinds
- Removes the weighty burden of excess carbide required for future regrinds
Choose blades which are lightweight, consistent, durable and disposable!
Coarse Blade, Radius Ends, 2 inch (103535) | |
| Coarse blade with radius ends (stick on ) |
Fast Blade, Standard, 3 inch (103543) | |
| Aggressive blade with backing plate - suitable for all standard 3 1/4" floats |
Fast Blade, Standard, 2 inch (103542) | |
| Aggressive blade with backing plate - suitable for all standard 2" floats |
Coarse Blade, Standard, 3 inch (103541) | |
| Coarse blade with backing plate - suitable for all standard 3 1/4" floats |
Coarse Blade, Standard, 2 inch (103541) | |
| Coarse blade with backing plate - suitable for all standard 3 1/4" floats |
Medium Blade, Standard, 2 inch (103540) | |
| Medium blade with backing plate - suitable for all standard 2" floats |
Coarse Blade, Radius Ends, 1.5 inch (103534) | |
| Coarse blade with radius ends (stick on ) |
Medium Blade, Radius Ends, 2 inch (103533) | |
| Medium blade with radius ends ( stick on ) |
Medium Blade, Radius Ends, 1.5 inch (103532) | |
| Medium blade with radius ends ( stick on ) |
Medium Blade, Standard, 3 inch (103541) | |
| Coarse blade with backing plate - suitable for all standard 3 1/4" floats |
Diamond Grit (104210) | |
 
| Small diamond S file for finishing off smaller areas of the mouth |
Split Blue Diamond Combo File (104225) | |
 
| Long lasting S file for finishing off the arcades. Concave shaped at one end and curved at the other. Cutting medium on both sides of curved end and just on the concave side of the other end. |